澳门新葡新京2885com-澳门新葡新京网址-[官网]

澳门新葡新京2885com
POSITION:HOME > PRODUCT >Brazed plate heat exchanger

Brazed plate heat exchanger

Stainless steel welded plate heat exchanger


Product description
Performance parameters:
Temperature: ≤550°C
Pressure: ≤25bar
Flow rate: ≤200m3/h
advantage:
Suitable for high cleanliness requirements or need to avoid heat transfer under copper/nickel ion contamination conditions.
Corrosion resistant, high temperature resistant, high pressure and other harsh conditions.
Health, food grade.
Compact structure.
material:
End plate: stainless steel
Interface: stainless steel
Plate: stainless steel
Welding material: stainless steel
Product advantages
The hygienic and corrosion resistance of all stainless steel welded plate heat exchangers is unmatched by any other brazed plate heat exchanger. Under some temperature changes and pressure fatigue conditions, the traditional brazed heat exchanger is not competent, and the use of high-efficiency plate heat exchangers becomes feasible under these conditions due to the appearance of all-stainless steel welded plate heat exchangers. .
All stainless steel welded plate heat exchangers break through the limitations of gaskets and copper brazing on heat exchangers. When industrially treating high temperature and corrosive media, all stainless steel welded plate heat exchangers provide a high efficiency heat transfer. Plate heat exchanger solution with good sealing and low operating cost. The stainless steel construction allows it to withstand temperatures up to 550 °C.
To ensure high safety, reliability and durability, all stainless steel welded plate heat exchangers have been thoroughly tested with emphasis on pressure fatigue, temperature fatigue and corrosion resistance. This reliability, along with innovative design with multiple benefits, makes the all-stainless steel welded plate heat exchanger cost-effective in special industrial heat transfer solutions. For example, the ammonia refrigerant system's corrosion resistance makes it possible to apply a large number of all-stainless steel welded plate heat exchangers to heating devices with corrosive media.
Food-grade heat exchange channels and high mechanical strength make all-stainless steel welded plate heat exchangers the choice of industries that focus on hygienic conditions, such as clean water and hot water units, tap water heating systems, etc.

Product specification data sheet
Fusion welded plate heat exchanger name height 
mm
width 
mm
thickness
 mm
Longitudinal pitch mm Transverse pitch  mm Single channel volumeL weight      kg Heat exchange area Maximum flow m³/h Channel form Pressure ratingbar Maximum number of pieces Maximum take-over size Minimum welding Maximum outer spiral tube size Minimum outer spiral tube size Maximum internal threaded tube size Minimum internal threaded tube size Maximum clamp take-over size Minimum clamp take-over size Flange connector size
BKR014 206 76 2.30N+9 172 42 0.02 0.6+0.056*N 0.014*(N-2) 4 D 15/25 100 7/8" 3/8" 3/4" 1/2" 3/4" 1/2" * * *
BKR020B 318 78 2.30N+9 282 42 0.04 0.9+0.088*N 0.020*(N-2) 4 D 15/25 100 7/8" 3/8" 3/4" 1/2" 3/4" 1/2" * * *
BKR026 310 111 2.40N+9 250 50 0.05 1.0+0.12*N 0.026*(N-2) 18 DXH 15/25 120 1 1/2" 3/8" 1 1/2" 1/2" 1" 1/2" * * *
BKR030 304 124 2.40N+13 250 70 0.065 2.2+0.146*N 0.030*(N-2) 18 D 15/25 100 1 1/8" 3/8" 1" 1/2" 1" 1/2" * * *
BKR050B 525 111 2.40N+9 466 50 0.09 2.4+0.2*N 0.050*(N-2) 18 DXH 15/25 120 1 1/2" 3/8" 1 1/2" 1/2" 1" 1/2" * * *
BKR060 526 119 2.35N+10 470 63 0.11 2.4+0.223*N 0.060*(N-2) 18 D 15/25 100 1 5/8" 5/8" 1 1/2" 1/2" 1" 1/2" * * *
BKR095B 616 191 2.80N+11 519 92 0.25 5.5+0.39*N 0.095*(N-2) 35 DXH 15/25 180 2 1/8" 5/8" 2" 1 1/2" 2" 1/2" 2" 1 1/2" *
BKR110 528 246 2.36N+10 456 174 0.21 7.0+0.472*N 0.114*(N-2) 45 D 15/25 250 2 1/8" 5/8" 2 1/2" 1/2" 1 1/2" 1/2" 2" 1 1/2" *
BKR200 738 321 2.7N+13 603 188   13.0+0.73*N 0.20*(N-2) 150 DXH 15/25 300 3 7/8" 1 1/8" 3" 2" 2" 1" 3" 2" DN100
Remarks: 1. The above product data is for reference only. The accurate data is subject to the product design book and product drawings issued by our company. 2. The above products are the specifications of our company's conventional brazed plate heat exchangers. Our company can also provide some non-standard customized products. For details, please contact our technical department for consultation. 3. Our company can provide clamps, flanges and other non-standard forms to take over according to customer requirements. For details, please contact our technical department for consultation.


XML 地图 | Sitemap 地图